How long does it take to charge a power station with solar panels?

Divide the station's watt-hours by your panels' real-world output (about 70% of the rated watts). A 2,000Wh station on 400W of panels takes roughly 7 hours of good sun. Stations cap input at their max solar rating, so oversized arrays don't help.

Can I use any solar panel with my power station?

Mostly yes, as long as the panel's voltage stays within the station's solar input range and the wattage doesn't exceed its max. Check your station's VOC limit in the specs before wiring panels in series.

Solar Pairing Calculator — How Fast Panels Recharge Each Power Station

Max solar input comparedThe most panel watts each station can use — extra panel goes unused

DELTA Pro 3 2,600W

SOLIX F3800 2,400W

SOLIX F3000 2,400W

Explorer 2000 Plus 1,200W

AC200L 1,200W

Elite 200 V2 1,000W

DELTA 2 Max 1,000W

C2000 Gen 2 800W

Power 1000 800W

SOLIX C1000 600W

DELTA 3 Plus 500W

Explorer 1000 Plus 400W

Real-world panels deliver ~70% of their rating; pair your array to the station's ceiling.

Max solar input across our database

A station can only drink what its solar controller allows. The chart above shows each model's ceiling — pairing a 1,600W array with a station capped at 800W wastes half your panels. Size the array to the station, not the other way around.

For panel picks and wiring tips, read our solar panel pairing guide.

Solar pairing calculator

Max solar input across our database